Halloween

Starter

Halloween Witch Hat Spiral Candy Storage Container

💜 A little witchy magic! 🎃 Print this adorable spiral witch hat candy container with a removable lid. Perfect for spooky Halloween treats!

👁 – ⬇ – 💬 –

Checking membership…

Starter model • Download with a paid membership • Personal use

Print Information

Category: Halloween
Material: PLA
Nozzle: 0.4 mm
Layer Height: 0.20 mm
Supports: Yes
Infill: 10%
Difficulty: Intermediate
License: PixelForm Free Personal

About This Model

🧙‍♀️ Halloween Witch Hat Spiral Candy Storage

Bring a little witchy magic into your home with this charming Halloween Witch Hat Spiral Candy Storage Container!

Designed with a beautiful spiral texture, a magical curved witch hat, and an adorable green bow, this unique 3D printable container combines spooky Halloween charm with practical everyday storage.

The rich purple body, contrasting black base, and playful green bow create a magical color combination that feels both mysterious and cute!

🎃 DESIGN FEATURES

Beautiful spiral-textured container body
Removable witch hat lid with curved tip
Adorable decorative bow
Eye-catching multi-color design
Spacious interior for small treats
Decorative black base with Halloween lettering
Reusable seasonal storage container
Functional and decorative design

🍬 PERFECT FOR

Individually wrapped Halloween candies
Wrapped chocolates and small treats
Halloween party table decorations
Spooky desk and shelf accessories
Seasonal home decorations
Halloween gifts and surprises
Small keepsakes and accessories

🖨️ 3D PRINTING INFORMATION

Recommended Material: PLA
Nozzle Size: 0.4 mm
Layer Height: 0.20 mm
Recommended Infill: 10–15%
Recommended Wall Loops: 3
Color Combination: Purple, Black, White, and Green

The container and witch hat lid are printed separately. Follow the provided print profile and check the sliced preview for any required supports.

✨ WHY YOU'LL LOVE IT

Unlike an ordinary candy jar, this whimsical design transforms a simple storage container into a magical Halloween decoration.

The spiral texture adds character, while the removable witch hat makes accessing your treats easy and fun.

Choose the original witchy purple combination or experiment with your favorite Halloween colors!

Important: Use individually wrapped candies only. This 3D printed container is not certified for direct food contact.

💜 Designed with creativity and care by PixelForm Studio.

Make your Halloween a little sweeter, spookier, and more magical!

Printing Tips

Print with the settings listed above.

How to Print Halloween Witch Hat Spiral Candy Storage Container

Recommended print settings, explained

Layer height (0.20 mm): 0.20 mm is the best balance of smooth curves and reasonable print time for most models. Use 0.16 mm for extra-smooth curved surfaces, or 0.24–0.28 mm for a quick draft.
Infill (10%): Decorative prints need little infill. 10–15% gyroid keeps the model light and quick to print; extra walls add more strength than extra infill.
Supports (Yes): This model needs supports for some overhangs. Tree (organic) supports usually leave the cleanest surfaces; check the slicer preview before printing and remove supports slowly with flush cutters once the print has cooled.
Walls: use at least 3 walls (perimeters) so the outer surface is solid and edges stay crisp after sanding.

Filament and material advice

PLA is listed for this model and is the easiest choice for decorative prints: it prints at 200–220°C with almost no warping, holds fine details and comes in the widest range of colors. Switch to PETG only if the print will sit in a hot car, in direct sun or outdoors.

Printing and post-processing tips

Wash the build plate with warm water and dish soap before printing; fingerprints are the most common cause of parts lifting.
A brim is only needed if corners start to lift; most models stick well on a clean textured or smooth PEI plate.
Let the print cool fully before removing it, then trim any brim or strings with flush cutters.
Light sanding (220, then 400 grit) smooths layer lines; a filler primer and acrylic paint give a fully finished look.

Frequently asked questions

Can I scale this model?: Yes. Scaling up is usually safe; when scaling down, check in the slicer preview that thin walls still have at least two line widths (about 0.8 mm with a 0.4 mm nozzle).
Which printers can print it?: Any FDM printer with a 0.4 mm nozzle and a build plate larger than the model. The settings on this page were chosen to work on common printers without special tuning.
Can I sell prints of this model?: Not under the default license, which covers printing for yourself, your household and gifts. To sell physical prints, contact PixelForm first for written permission. Sharing or reselling the digital files is never allowed.
Is it food safe?: Printed plastic has small grooves between layers that are hard to clean. Use it for wrapped treats, or put a liner or small dish inside for loose food.