Moon Stars Mini Storage Case 4 Compartments

About This Model

🌙 Moon & Stars Mini Storage Case – 4 Compartments ⭐ Small Size, Big Possibilities! Bring a little nighttime magic to your everyday organization with our adorable Moon & Stars Mini Storage Case! Inspired by the beauty of the night sky, this charming 3D-printable organizer features a bright crescent moon, tiny stars, and a compact circular design. It's the perfect combination of cute decoration and practical storage. ✨ FEATURES 🌙 Magical Moon & Stars Design A cheerful yellow crescent moon and delicate white stars decorate the lid, creating a lovely celestial-inspired appearance. ⭐ Four Storage Compartments Inside, four separate sections help organize tiny accessories without mixing everything together. 💍 Perfect for Small Treasures Store beads, charms, small jewelry pieces, craft accessories, miniature decorations, and other tiny essentials. 🔑 Built-in Keychain Hole The integrated attachment hole allows you to add a keyring, strap, or clip for convenient carrying. 🖤 Compact & Lightweight Small enough for a desk, drawer, craft station, or bag, making it useful at home or while traveling. 🎁 A Cute Gift Idea A thoughtful little gift for students, craft lovers, jewelry enthusiasts, and anyone who enjoys celestial designs. 🖨️ 3D PRINTING INFORMATION - Recommended material: PLA - Recommended nozzle: 0.4 mm - Suggested layer height: 0.16–0.20 mm - Suggested infill: 15% - Three suggested colors: black, yellow, and white - Check hinge movement and lid fit after printing 🎨 COLOR IDEAS Try navy blue with golden stars, pastel pink with a white moon, or classic black with a bright yellow crescent! ⚠️ IMPORTANT NOTES This is a digital 3D-printable model, not a physical product. Keychain hardware and decorative accessories are not included. Not intended for food storage. Keep small parts away from young children. ❤️ Designed by PixelForm Studio Little designs, big smiles! Thank you for supporting our creat

Printing Tips

• ✓ Print with the settings listed above.

How to Print Moon Stars Mini Storage Case 4 Compartments

Recommended print settings, explained

• Layer height (0.20 mm): Small details and lettering benefit from finer layers. If faces or text look soft at 0.20 mm, try 0.16 mm before going lower — it adds only about a quarter more print time.
• Infill (10%): Decorative prints need little infill. 10–15% gyroid keeps the model light and quick to print; extra walls add more strength than extra infill.
• Supports (No): This model is designed to print without supports. Keep supports switched off in your slicer: every overhang is shallow enough to print cleanly, and you save both filament and clean-up time.
• Walls: use at least 3 walls (perimeters) so the outer surface is solid and edges stay crisp after sanding.

Filament and material advice

PLA is listed for this model and is the easiest choice for decorative prints: it prints at 200–220°C with almost no warping, holds fine details and comes in the widest range of colors. Switch to PETG only if the print will sit in a hot car, in direct sun or outdoors.

Printing and post-processing tips

• Wash the build plate with warm water and dish soap before printing; fingerprints are the most common cause of parts lifting.
• Add a 3–5 mm brim so small parts stay put, and set a minimum layer time of about 8 seconds so tiny layers can cool.
• Let the print cool fully before removing it, then trim any brim or strings with flush cutters.
• Light sanding (220, then 400 grit) smooths layer lines; a filler primer and acrylic paint give a fully finished look.

Frequently asked questions

Can I scale this model?

Yes. Scaling up is usually safe; when scaling down, check in the slicer preview that thin walls still have at least two line widths (about 0.8 mm with a 0.4 mm nozzle).

Which printers can print it?

Any FDM printer with a 0.4 mm nozzle and a build plate larger than the model. The settings on this page were chosen to work on common printers without special tuning.

Can I sell prints of this model?

Not under the default license, which covers printing for yourself, your household and gifts. To sell physical prints, contact PixelForm first for written permission. Sharing or reselling the digital files is never allowed.

More detail in our printing guides and the license terms.